Installation; Electrical Connection - Baumatic PECM1SS Instruction Manual

Semi-automatic built-in espresso coffee machine
Hide thumbs Also See for PECM1SS:
Table of Contents

Advertisement

INSTALLATION

The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European Norm
Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
Before connecting the appliance, make sure that the supply voltage
marked on the Rating Plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance should be wired into a 13 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your coffee machine is
located in its housing.
o If you have to change the coffee machine power cord, the
earthing (yellow/green) conductor must always be 10 mm longer
than the line conductors.
o Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
o If the mains supply cable is damaged, then it must be replaced
with a suitable cable.
26

Advertisement

Table of Contents
loading

Table of Contents