Filling The Reservoir (Automatically) - Baumatic PECM1SS Instruction Manual

Filling the reservoir (automatically)

IMPORTANT: Make sure that your appliance has been
connected to your mains water supply (see "Connecting the
coffee machine to the mains water supply" section on pages
30 - 31 of this booklet).
o Open the water reservoir door (14) and remove the water
reservoir (15) from the coffee maker.
o Connect the water softener (11) to the longest tube that hangs
down inside the water reservoir compartment.
o Put the water reservoir back into the cabinet and immerse the
water softener in water, the other tubes must also be placed
inside the reservoir. Make sure that the water reservoir is
pushed back fully into the water reservoir cabinet.
o IMPORTANT: Leave the water softener immersed in water for 5
minutes before attempting to make a drink. You only need to do
this the before using the machine for the first time or if you have
changed the water filter.
o Switch the appliance on using the ON/OFF switch (20); the
ON/OFF neon (22) will light.
o The appliance will check to see if the water reservoir has enough
water in it. If there is not enough water, the water reservoir
empty neon (28) will flash.
12