Using Your Coffee Machine; Filling The Reservoir (Manually) - Baumatic PECM1SS Instruction Manual

Using your coffee machine

Filling the reservoir (manually)

IMPORTANT: If your coffee machine is not connected to
your mains water supply, then you will need to fill the water
reservoir manually before using your appliance.
o Open the water reservoir door (14) and remove the water
reservoir (15) from the coffee maker.
o Fill the water reservoir with cold water from a tap; you should fill
it with water until it is two thirds full.
o Connect the water softener (11) to the longest tube that hangs
down inside the water reservoir compartment.
o Put the water reservoir back into the cabinet and immerse the
water softener in water, the other tubes must also be placed
inside the reservoir. Make sure that the water reservoir is
pushed back fully into the water reservoir cabinet.
o IMPORTANT: Leave the water filter immersed in water for 5
minutes, before switching on the appliance and attempting to
make a drink. You only need to do this before using the machine
for the first time or if you have changed the water filter.
11