Table of Contents
Advertisement
Dispensing hot water
o Fill the water reservoir if your appliance is not connected to your
mains water supply.
o Switch the machine on using the ON/OFF switch (20).
o Let the water reservoir fill with water automatically if it is
connected to your mains water supply.
o Once the machine has stopped filling and the water reservoir
empty neon (28) has gone out, press the water boiler ON/OFF
button (29). The water boiler neon (23) will flash to indicate
that the water boiler is heating up.
o The machine is ready to dispense hot water when the water
boiler neon (23) stops flashing and remains lit.
o Place a cup underneath the filter holder ring nut (19) and then
press the hot water dispensing button (30).
o To stop hot water from dispensing, press the hot water
dispensing button (30) again.
It is perfectly normal for there to be a noise and a small
amount of water backfilling into the drip tray, after water
has been dispensed.
14
Advertisement
Table of Contents
