Lightweight Directory Access Protocol (Ldap) Corporate Directory Search - Cisco SPA303 Administration Manual

Cisco SPA IP Phone Field Reference
Phone Tab
NOTE
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Call Feature Sync Ext
Lightweight Directory Access Protocol (LDAP) Corporate
Directory Search
Does not apply to the WIP310, SPA301, or SPA501.
If using Active Directory with authentication set to MD5, you must first configure
the following:
• Click the System tab. In the Optional Network Configuration section, under
Primary DNS, enter the IP address of the DNS server.
• In the Optional Network Configuration section, under Domain, enter the
LDAP domain.
Parameter
LDAP Dir Enable
LDAP Corp Dir Name
LDAP Server
Description
Allows the phone to synchronize with the call server so
that if Do Not Disturb or Call Forwarding settings are
changed on the phone, changes are also made on the
server; if changes are made on the server, they are
propagated to the phone.
This feature is disabled by default.
Choose the extension (1 through 5) that is registered to
the BroadSoft server.
Description
Choose yes to enable LDAP.
Enter a free-form text name, such as "Corporate
Directory."
Enter a fully qualified domain name or IP address of
LDAP server, in the following format:
nnn.nnn.nnn.nnn
B
288