Configuring Spcp On The Cisco Spa525G/525G2 - Cisco SPA303 Administration Manual

Configuring SIP, SPCP, and NAT

Configuring SPCP on the Cisco SPA525G/525G2

STEP 5
Configuring SPCP on the Cisco SPA525G/525G2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Auth ID
Mini Certificate
SRTP Private Key
Click Submit All Changes.
The Cisco SPA525G/525G2 can be used as part of a Cisco Unified
Communications System. This system uses SPCP (also called SCCP) for call
control features.
To configure SPCP on the Cisco SPA525G/525G2:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the System tab.
Under System Configuration, in the SPA525-protocol field, choose SCCP.
(Optional) To configure the phone to automatically detect the protocol being used
on the network to which it is connected, in the SPA525-auto-detect-sccp field,
choose yes.
Click Submit All Changes.
Description
Authentication ID for SIP authentication.
Defaults to blank.
Base64 encoded of Mini-Certificate concatenated with the
1024-bit public key of the CA signing the MC of all subscribers
in the group.
Defaults to blank.
Base64 encoded of the 512-bit private key per subscriber for
establishment of a secure call.
Defaults to blank.
4
122