Connecting the Headset Cable
1. Seat the D15 cable end connector firmly over the CANbus/Audio Connector on the Quick Mount Smart Dock.
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. Slide the cable ends together until they click shut. Do not twist or bend the connectors. The Thor VM2 internal
microphone and speakers are automatically disabled when the headset is connected.
The Thor VM2 is ready for voice-enabled applications.
Headset
1. Microphone
2. Headphones
3. Connects to end of voice
cable
Thor VM2 Audio Cable
3-5