Wiring Diagram - Honeywell Thor VM2 User Manual

Vehicle mount computer microsoft windows embedded standard operating systems

Hide thumbs Also See for Thor VM2:

Table of Contents

Always route the cable so that it does not interfere with safe operation and maintenance of the vehicle.

Provide mechanical support for the cable by securing it to the vehicle structure at approximately one foot intervals,

taking care not to over tighten and pinch conductors or penetrate outer cable jacket.

5. Connect the DC power cable to the input connector on the back of the Dock.

6. Flip the power switch on the back of the Dock to On.

7. The Thor VM2 can be installed in the Dock.

8. If using the

optional screen blanking

Wiring Diagram

1. Existing Circuitry on Vehicle

2. Forklift Battery

3. Main Switch

4. 10A Slow blow Fuse close to power source

5. Isolated DC/DC Power Supply

6. Red Wire (DC +)

feature, install the screen blanking box or switch.

7. Black Wire (DC -)

8. Green Wire (Ground)

9. Blue Wire (not connected)

10. Thor VM2 Computer in Quick Mount

Smart Dock

11. COM1 or COM2 Connector on Dock

12. Circular Power Connector on Dock

3-15

Table of Contents