Restart/Shutdown; Calibrate Touch Screen - Honeywell Thor VM2 User Manual

Vehicle mount computer microsoft windows embedded standard operating systems

Hide thumbs Also See for Thor VM2:

Table of Contents

Restart/Shutdown

Use the Windows interface to restart or shut down the Thor VM2.

Tap Start > Shut Down > Restart

Tap Start > Shut Down > Shut down

To calibrate the touch screen, access the touch screen software. Select:

Tap Start > Programs > PenMount Universal Driver > Utility > PenMount Control Panel. Select PenMount 6000

USB and then tap Configure. Select Standard Calibration or Advance Calibration. Advanced Calibration allows the

user to select the number of calibration points. With either option, follow the on screen instructions to touch the red

square, hold the touch and then lift the stylus to complete the calibration process.

2-14

Table of Contents