Cisco 3521 Administrator's Manual page 103

Chapter 3 Configuring the Cisco IPVC 3500 Series Gateway
Table 3-11
Column or Field
Prefix
Description
NPI
TON
NSF
Max Digits
DN Manipulation
Total
The following topics discuss how you can configure Advanced ISDN Settings:
•
•
•
You can select the Same as Port check box and select another PRI port to duplicate advanced ISDN
Note
settings from that port. When you select this option, you cannot make any edits to the configuration
settings. This option is unavailable in gateways that support only one PRI port.
About NSF Settings
The NSF Information Element (IE) feature enables system administrators to coordinate network and
service requirements with service providers. Service providers supply the information that you enter in
the NSF Configuration dialog box. System administrators can either select any of the pre-configured
NSF settings, or choose to configure their own NSF Information Element using service provider
information.
You can specify the following information in the NSF:
•
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
OL-7995-01
Advanced ISDN Tab Details
About NSF Settings, page 3-41
Adding or Editing ISDN Information Elements, page 3-47
Deleting ISDN Information Elements, page 3-49
The service providers with which you want their network to work.
Configuring Gateway Settings
Description
Displays the prefix of the advanced ISDN entry.
Displays a brief description of the advanced ISDN
entry.
Displays the Numbering Plan Identification (NPI)
classification for the ISDN phone number.
Displays the Type of Number (TON) code for the
advanced ISDN entry.
Indicates whether the Network Specific Facility
feature is enabled or disabled for the Advanced
ISDN entry.
Displays the maximum number of digits allowed
for outbound dialing.
Indicates whether advanced ISDN prefix number
is enabled. For default prefix entries where TON
is local, this field indicates whether the DN
Manipulation setting is set to Append Local Area
Code in the Add or Edit ISDN Information
Elements dialog box (see Adding or Editing ISDN
Information Elements, page 3-47
information).
Displays the total number of ISDN information
elements currently listed in the gateway database.
for more
3-41