About Cisco Ipvc 3540 Pri Gateway Modules - Cisco 3521 Administrator's Manual

About Cisco IPVC 3500 Series Gateway Products

About Cisco IPVC 3540 PRI Gateway Modules

The Cisco IPVC 3540 PRI Gateway module enables audio, video, and data communication between
H.320 endpoints that connect through ISDN, and H.323 endpoints that connect through a packet-based
network. For voice-over-IP, the gateway enables PSTN voice callers to connect from the ISDN network
to IP voice callers. The Cisco IPVC 3540 PRI Gateway supports two PRI ISDN ports.
Table 1-5
Figure 1-5
Table 1-5
Component
10/100BaseT Ethernet
port
Serial port
Reset (RST) Button
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
1-6
show and explain a Cisco IPVC 3540 PRI Gateway module (Cisco IPVC-3540-GW2P).
Cisco IPVC 3540 PRI Gateway Module
I P /
V C
- 3 5
4 0 -
G W
2 P
S
1 0 /
1 0 0
B A
S E
10/100BaseT-1
Serial Port
Reset Button
Cisco IPVC 3540 PRI Gateway Front Panel Components
Description
This is a full-duplex Ethernet port that connects to the
network through a standard RJ-45 connector.
This is an EIA-TIA-232 port that accepts a male DB-9
connector. The serial port is used to set the IP address
for the module and to monitor gateway activity.
This button resets the module. When the module is in
the top chassis slot, this button resets the cPCI bus as
well, and any other modules connected to the bus are
also reset.
Chapter 1
S E
R I A
T - 1 L
G K
R S
R e
T g
C D
A L
A R
M
A C
T
LEDs
Overview of the Cisco IPVC 3500 Series Gateway
Figure 1-5 and
OL-7995-01