Cisco 3521 Administrator's Manual page 114

Viewing Call Information
Table 3-18
Field
Start
Duration
Bandwidth (Kbps)
Source section
Source
Number
B channels
Resync B channels
Audio
Video
Data
Gateway section
Transcoded
Destination section
Destination
Number
Name
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
3-52
Call Details Window Fields
Chapter 3 Configuring the Cisco IPVC 3500 Series Gateway
Description
Displays the time at which the call began.
Displays the length of time that the call has been
in progress.
Displays the total bandwidth (in Kbps) used for
this call on both sides.
Indicates whether the source endpoint of the call
is located on an ISDN or IP network.
Displays the alias that identifies the source
endpoint of the call.
Displays the B channels currently in use for this
call.
In mid-call, you can click this button to
resynchronize B channels in cases of poor call
quality.
Use this option with extreme caution.
Caution
Resynchronizing B channels can cause
a call to disconnect.
Displays the audio transcoding protocol and the
bandwidth of the voice calls in both directions
between the source endpoint and the gateway.
Displays the video transcoding protocol, the
frame format, and the bandwidth of the video calls
in both directions between the source endpoint
and the gateway.
The Video 2 stream is active when dual
Note
video streams for a single call are in use.
Displays the bandwidth of the data calls in both
directions between the source endpoint and the
gateway.
Indicates that a call is transcoded.
Indicates whether the destination endpoint of the
call is located on an ISDN or IP network.
Displays the alias that identifies the destination
endpoint of the call.
Displays the name that identifies the destination
endpoint of the call.
OL-7995-01