Refreshing Gateway Status; Configuring Gateway Settings - Cisco 3521 Administrator's Manual

Configuring Gateway Settings

Click Details.
Step 3
The Details dialog box appears, displaying the following information:
•
•
•
•
•

Refreshing Gateway Status

You can refresh the information that appears in the Status tab
Procedure
On the toolbar, click Refresh.
Step 1
Configuring Gateway Settings
In the Settings tab of the Gateway interface, you can configure gatekeeper and Interactive Voice
Response (IVR) addressing, the type of connection to the IP network, dialing delimiters, media
encoding/decoding protocols, Quality of Service levels, which events cause the gateway to send SNMP
traps, gateway resource levels for T.120 enabled and audio transcoded video calls, security settings, and
advanced settings such as load balancing support.
The following topics discuss the settings you can configure in the Settings tab:
•
•
•
•
•
•
•
•
•
•
•
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
3-4
Port 1 and Port 2-Displays the status of each of the B channels and of the D channel for each of
the BRI or PRI ports. In gateways that support only one BRI or PRI port, only the Port 1 section
appears.
Disabled-Displays the number of disabled B channels for each port.
Used-Displays the number of B channels currently in use for each port.
Free-Displays the number of B channels currently available for each port.
D channel-Displays the number of D channels for each port.
Configuring Basic Gateway Settings, page 3-5
Configuring IP Connectivity Settings, page 3-5
Configuring IVR Settings, page 3-9
About Encoding/Decoding Protocols, page 3-11
Configuring ISDN Channel Bonding Settings for Downspeeding, page 3-13
Configuring Quality of Service Settings, page 3-14
Configuring Alert Indications, page 3-15
Configuring Gateway Resources for Calls, page 3-21
Configuring Gateway Encryption, page 3-22
Configuring Advanced Settings, page 3-23
Configuring Advanced Commands, page 3-32
Chapter 3 Configuring the Cisco IPVC 3500 Series Gateway
(PRI Gateways only)
OL-7995-01