Chapter 3
Configuring the Cisco IPVC 3500 Series Gateway
Table 3-7
Mode
Encryption off
Best effort
Encryption required
Strong encryption required
The following channels support encryption:
•
•
•
All channels (audio, video, and FECC, incoming, outgoing) on the same call must have the same
Note
encryption levels. If the same encryption on all channels is not achieved, the call disconnects.
In the Security section of the Settings tab, you can configure gateway encryption settings.
Procedure
In the Gateway interface, on the sidebar, click Gateway (if not already selected).
Step 1
Click the Settings tab.
Step 2
Step 3
Click the Security button
Step 4
Select the Support encryption check box to enable gateway support for H.235 encryption for H.323
calls.
Step 5
In the Encryption mode field, choose one of the following settings:
•
•
•
Configuring Advanced Settings
In the Advanced section of the Settings tab, you can configure, enable, and disable various advanced
gateway settings.
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
OL-7995-01
Gateway Supported Encryption Capabilities
Audio channel
Video Channel
Far End Camera Control (FECC)
Best effort
Encryption required
Strong encryption required
Configuring Gateway Settings
Capabilities
Priority 1: No encryption
Priority 1: AES 128
Priority 2: DES 56
Priority 3: No encryption
Priority 1: AES 128
Priority 2: DES 56
Priority 1: AES 128
3-23