Table of Contents
Advertisement
Live Monitoring
Setting Display Options
Rev 2.00
Use the control buttons on the front panel to set how the images display on the screen. For
example:
•
HRDVS1: Does not offer camera switching.
•
HRDVS4, HRDVS8, HRDVS16:
•
Press a camera button to view the corresponding camera.
•
Press FUNCTION + Camera 1 to return to switching mode.
You can display the date and title of each camera on top of the image or the image can be
displayed without a camera title (see
Note
This feature is only available when the HRDVS unit is not recording.
You can also select how frequently the Text Insertion ports scrolls by and how many lines
of text are displayed (see
Setting Alarm
Use the Switcher screen to enable the cameras that are displayed sequentially on the
monitor screen. You can also deselect certain cameras so that they do not display on the
monitor.
Note
This feature is only available with the HRDVS4, HRDVS8, and HRDVS16
models.
To set the monitor display options:
1.
Access the Install menu as follows: Main Setup
Figure 14-1
Install Menu
2.
Select Switcher, then press Enter.
Configuring the Video
Events, page 67).
➤
Install.
Figure 14-2
displays.
80
Inputs, page 20).
Figure 14-1
displays.
The Switcher button will
appear greyed out on the
HRDVS1. This model
supports only one camera
input so the switcher option
is not necessary.
Document 900.0281
02/07
Advertisement
Table of Contents
