Table of Contents
Advertisement
Field
Camera Enable
Title Enable
Date Enable
Title Text
Position
Text Event
Auto Detect
Rev 2.00
2.
Use the following table to enable cameras and set how text is displayed on the video
images.
Description
Options are:
Enable (default), disable.
You must enable this box for each camera that is connected to the HRDVS.
Must be enabled for the title to be displayed on the recorded video.
Must be enabled for the date to be displayed on the recorded video.
The camera name entered is displayed as selected in the Position field.
Position of the title and date in the camera field of view. Position options are:
Upper left
Lower left
Single line bottom
Single line top
Split Title/Time
Split Time/Title
Maps the text input on (virtual) Text Ports 1 to 4 (or none) to the selected camera
video.
When selected, the autodetect is performed on the camera input selected. Any live
connected cameras will be detected and automatically enabled in the Switcher
monitor and Camera Input screens.Video inputs with no input will be disabled. This
takes about 10 seconds.
To change the text that displays on the recorded video clips:
1.
Go to Title Text field. Activate the box by pressing Enter, then press
change the value. Camera 1 button inserts or appends a letter. Camera 2 button
deletes a letter. Camera 3 button opens the Text Entry screen. See
Menus, page
27
for more information on using the Text Entry screen.
2.
Press Enter to confirm your changes.
3.
In the Position field, select where you want the title to display on the video.
4.
When you have finished making your selections, select Accept, then press Enter to
activate your changes and exit this screen.
21
HRDVS Reference Guide
or
to
Navigating In the
Document 900.0281
02/07
Advertisement
Table of Contents
