Table of Contents
Advertisement
Live Monitoring
Camera Homing
Rev 2.00
Note
We recommend that you synchronize all AC powered connected cameras to
avoid camera roll in sequence mode.
You can program the HRDVS to monitor a sequence of cameras in the switcher setup. You
can also have the HRDVS, upon detection of an event, display on the main monitor the
current live camera video detecting the event.
You can set your HRDVS to:
•
Display a specific camera if a motion event is detected
•
Display a sequence of cameras if an alarm event is detected
•
Display a specific camera if a text event is detected
For more information on enabling this function, see
Setting Alarm
Events, page 67.
General Event
82
Setup, page
61
and
Document 900.0281
02/07
Advertisement
Table of Contents
