Advertisement
22. Using two pairs of needle-nose pliers, bend the
antenna plate according to the illustration and
measurement shown.
ANTENNA
SCALE
PLATE
8 of 21
www.collegehillshonda.com
15 mm
(0.6 in.)
8 mm
(0.3 in.)
NEEDLE-NOSE PLIERS
6D01222T
23. Measure the antenna cable as shown. Attach the
three foam cushion tapes to the antenna cable in
the measurement shown.
ANTENNA
CABLE
24. Using isopropyl alcohol on a shop towel, clean the
area where the antenna will attach. Allow the area
to dry before proceeding.
ROOF LINER
PLATE
25. Remove the adhesive backing from the antenna,
insert the antenna plate under the roof liner, and
attach the antenna to the windshield aligning the
template.
26. Remove the template.
AII 38216-38957 (0802)
ANTENNA
FOAM
CUSHION TAPE
360 mm
(14 in.)
30 mm
(1.2 in.)
30 mm
(1.2 in.)
Clean with
isopropyl alcohol.
TEMPLATE
ADHESIVE
BACKING
ANTENNA
© 2008 American Honda Motor Co., Inc. - All Rights Reserved.
6D01240T
6D01250T
Advertisement
