Honda 08E91-E22-100B Installation Instructions Manual page 10

32. Secure the antenna cable to the vehicle harness
with a wire tie. Secure the wire tie between the
vehicle harness branching points.
VEHICLE
HARNESS
BRANCHING
POINT
10 of 22
www.collegehillshonda.com
WIRE TIE
ANTENNA
CABLE
6D01281T
Installing the Control Unit Bracket
33. Locate the small square hole next to the small
round hole in the dashboard support bracket.
Under the dashboard, attach the control unit
bracket to the vehicle bracket near the front lower
pillar using a flange nut. If the vehicle is equipped
with a moonroof, be careful not to pull on the drain
tube.
VEHICLE
BRACKET
AII 38215-38958 (0802)
VEHICLE
BRACKET
FLANGE
NUT
CONTROL UNIT
BRACKET
© 2008 American Honda Motor Co., Inc. - All Rights Reserved.
FRONT
6D01123T