Figure 3-71 Port Setup Screen - Honeywell HRSD8 User Manual

Configuration
3.
4.
5.
6.
7.
8.
9.
10. Highlight the field beside Line Delimiter and press
11. Highlight the field beside Ignore String and press
Document 800-03650 Rev D
02/09
Figure 3-71 Port Setup Screen
Use the ATM or POS manufacturer's recommended settings when configuring the
RS232C, RS485 or USB-Serial ports. You need to know the Baud Rate, Data Bit
number, Stop Bit number, and Parity. Highlight OK and press
settings.
Highlight the field beside Text-In Product and press
the list.
Note The screen changes for different types of text input devices, so
there are different parameter fields for you to enter information.
Highlight the field beside Virtual Port, and press
use. This field is activate only when setting up the VP Filter device.
Highlight the field beside Transaction Start and press
keyboard to enter the Transaction Start string. Refer to the device manufacturer's
documentation for the text string that the device first sends when a transaction
starts.
Turn on Any Character if you want the DVR to react to any character sent from
the text input device. Highlight Any Character and press
On and Off.
Note If Any Character is turned On, you cannot enter any text in the
Transaction Start field.
Highlight the field beside Transaction End and press
keyboard to enter the Transaction End string. Refer to the device manufacturer's
documentation for the text string that the device sends when a transaction ends.
Highlight the more line(s) field and press
lines of text that you want the DVR to record. You can choose from 0 to 10.
to enter the character(s) that the device uses to indicate the end of a line.
Special characters can be created using ^ and a capital letter: for example, ^J
for NL (New Line), ^M for CR (Carriage Return). Refer to the device
manufacturer's documentation for Line Delimiter character(s).
to enter any strings of text that you want the DVR to ignore.
to load the
. Select your device from
. Adjust the port number to
. Use the virtual
to toggle between
. Use the virtual
. Select the number of additional
. Use the virtual keyboard
. Use the virtual keyboard
97