Figure 3-78 System Event Actions Screen - Honeywell HRSD8 User Manual

Configuration
2.
3.
4.
5.
6.
Document 800-03650 Rev D
02/09
Figure 3-78 System Event Actions Screen
Highlight the Alarm-Out field beside the desired event (Check Recording, Check
Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk Temperature, or Disk
S.M.A.R.T.), and press
You can associate as many Alarm-Outs with the Event as you wish.
If the DVR detects that event, it triggers output signals on all the associated
Alarm-Out connectors. You can also have the DVR internal buzzer sound if an
event is detected.
Note Alarm-Out action cannot be set to System and Panic Record
events
Highlight the Notify field beside the desired event (System, Panic Record, Check
Recording, Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk
Temperature, or Disk S.M.A.R.T.), and press
Turn the entire list On or Off by highlighting Notification and pressing
Turn the individual items On or Off by highlighting them and pressing
Highlight OK and press
Note Mail Notify is the only option available for the System event.
Note For the Notify action to work, the DVR should be registered in the
RASplus (Remote Administration System).
Save your System Event changes by highlighting Save and pressing
Cancel to exit the screen without saving the changes.
. A list of Alarm Outputs appears.
to accept your changes.
.
.
.
. Select
105