Table of Contents
Advertisement
Operation
Exiting the PTZ Mode
Press PTZ to exit the PTZ mode.
Recording
Recording Video
After you have installed the DVR following the instructions in
ready to record. The DVR starts recording based on the settings you made in the
Record setup screen. See
Recycle On
The DVR records over the oldest video once the hard disk is full. The factory default is
or Recycle
Recycle On. Setting the DVR to Recycle Off causes it to stop recording once the hard
Off
disk is full.
Standard or
When set to Standard (factory default), the DVR has a maximum recording speed of 120
High
ips. When set to High, the DVR has a maximum recording speed of 60 ips.
Panic Recording
Pressing PANIC starts panic recording of all cameras, and pressing the button again
stops panic recording. If you set the Panic Recording Duration in the Record Screen,
panic recording stops automatically according to the preset duration as long as PANIC
is not pressed.
Document 800-03650 Rev D
02/09
Table 4-5
PTZ Toolbar Tools
Icons
Action
Exit the toolbar
Click the empty space under
located.
To re-display the toolbar, position the mouse pointer at the bottom of the
screen.
and drag the toolbar to where you want it
Chapter 3,
Configuration.
Chapter 2,
Installation, it is
119
Advertisement
Table of Contents
