Figure 3-67 Video Loss Actions 2 Screen - Honeywell HRSD8 User Manual

Configuration
Actions 2 Tab Settings
In the Video Loss Actions 2 tab, you can choose PTZ camera preset positions and spot
monitor actions.
Highlight the Actions 2 tab. The Video Loss Actions 2 screen displays.
Selecting PTZ Presets
You can preset the position for each PTZ camera and to where you want each PTZ
camera to move whenever the DVR detects video loss on the selected camera.
1.
2.
Associating Spot Monitors with Cameras
A Spot monitor can be associated with a camera. The DVR displays the associated
camera on the Spot monitor whenever it detects video loss on the selected camera.
1.
2.
94
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RASplus (Remote Administration System).
Figure 3-67 Video Loss Actions 2 Screen
Highlight the desired field under the PTZ heading, and press
presets appears.
Select the PTZ preset from the list.
Highlight the desired field under the Spot Monitor heading, and press
of Spot monitors and cameras appears.
Select from the list of spot monitors and cameras.
. A list of PTZ
. A list