Configuring Devices; Table 3-8 Notification Callback Setup Screen Options - Honeywell HRSD8 User Manual

Configuration
Option
LAN
IP Address
Retry
Modem
Remote Server Phone
Number
Outside Line Call
Callback Phone Number
Save your Notification changes by highlighting Save and pressing
to exit the screen without saving the changes.

Configuring Devices

Using the configuration devices, you can configure the:
•
•
•
•
•
62
Table 3-8 Notification Callback Setup Screen Options
Action
Highlight LAN and press
LAN is turned On, you can change the IP addresses.
Highlight the IP Address field that you want to change and press
Enter the IP address of the computer you want contacted during an
event.
You can enter up to five IP addresses.
Highlight the field beside Retry and enter the number of times you
would like the DVR to try contacting the computer. You can select
from 1 to 10 retries.
If the modem was enabled in the Network screen (see
Modem on page 56), you can set the DVR to contact a computer
running RASplus. Highlight Modem and press
On and Off. When Modem is turned On you can enter a telephone
number.
Highlight the field beside Remote Server Phone Number and use the
virtual keyboard to enter the telephone number of the computer
running RASplus.
Highlight the field beside Outside Line Call and enter any numbers
that must be dialed for an outside line for your telephone system. For
example, you may have to dial 9 to get an outside line.
Highlight the field beside Callback Phone Number and use the virtual
keyboard to enter the telephone number of the DVR.
Video
Audio
Alarm
Display
Remote control devices connected to the DVR
to toggle between On and Off. When
.
Setting Up the
to toggle between
. Select Cancel