Figure 3-75 Check Recording Screen - Honeywell HRSD8 User Manual

Configuration
2.
3.
4.
5.
6.
7.
8.
Setting an Automatic Alarm-In Check
Select the Alarm-In port you want to check by highlighting the corresponding field in the
Interval column and pressing
days or Never.
Setting Up Automatic Storage Check-Up
Highlight the Storage tab. The System Event Storage screen displays.
102
Figure 3-75 Check Recording Screen
Highlight Schedule On and press
set to On, the rest of the Check Recording screen becomes active.
Select + to add a setting to the Check Recording schedule. A new schedule
appears in the table.
You can set the day, time range, and interval that you want the DVR to run
self-diagnostics on the recorder. The Interval ranges from 1 min. to 7 days or
Never.
Select the Day field and press
choices from individual days from Sunday to Saturday, Monday-Friday,
Holidays, and All. Scroll to choose the setting, and press
Select the Range field and press
24-hour clock, and adjusts in 15 minute increments.
Highlight the Interval field, and press
DVR to run self-diagnostics on recording. A list appears from which you can select
1 hr. to 30 days or Never.
Select to delete a schedule.
Select OK and press
to toggle the schedule On and Off. When
to change the day. A menu appears with
to change the time range. The Range uses a
to change the interval that you want the
to save the changes.
. A list appears from which you can select 1 hr. to 30
to select.