Table of Contents
Advertisement
Configuration
1.
2.
3.
4.
92
Note
The system performance can be affected when a large quantity
of text inputs are detected from several channels at the same
time.
Note
VP Filter, Generic Text, and EPSON-POS devices are currently
supported.
Highlight the field beside Port and press
RS485, and USB-Serial (1~8). The Setup field becomes active.
Note
If you have set the Port as None, you cannot make any changes
to the screen.
Note
When using the USB to serial text-in device, do NOT remove the
USB cable from the port while the system is running.
Highlight Setup... and press
Figure 3-68
Port Setup Screen
Use the ATM or POS manufacturer's recommended settings when configuring the
RS-232C, RS485 or USB-Serial ports. You need to know the Baud Rate, Data Bit
number, Stop Bit number, and Parity. Highlight OK and press
settings.
Highlight the field beside Text-In Product and press
the list.
Note
The screen changes for different types of text input devices, so
there are different parameter fields for you to enter information.
. Select from None, RS-232C,
. The Port Setup screen appears.
to load the
. Select your device from
Advertisement
Table of Contents
