Figure 3-19 New User Setup Screen - Honeywell HRSD8 User Manual

Configuration
Authority Level
Setup
Color Control
PTZ Control
Alarm-Out Control
Covert Camera View
System Check
Record Setup
Search
Clip-Copy
Adding a User
1.
2.
3.
4.
5.
6.
50
Table 3-4 New Group Authority Level Assignments
Action
The user without Setup authority cannot establish any system settings
excluding system shutdown and logout on a local system or a PC running
RASplus.
The user can control brightness, contrast, hue, and saturation for cameras
on a local system or a PC running RASplus.
The user can control the PTZ camera on a local system or a PC running
RASplus.
The user can reset the DVR outputs including the internal buzzer that plays
during an alarm by pressing the ALARM button on a local system or
alarm-out control button on a PC running RASplus.
The user can view video from cameras set to Covert while in the Live
Monitoring or Search mode on a local system or a PC running RASplus.
The user can view the remote system status or check the remote system
status as a batch process on a PC running RASplus.
The user can establish all Record settings on a local system or a PC running
RASplus.
The user can access the Search mode on a local system or a PC running
RASplus.
The user can copy video clips on a local system or a PC running RASplus,
and save video data in an AVI, bitmap, or JPEG file format.
Highlight the + User... field and press
can enter the User Name.
Figure 3-19 New User Setup Screen
Enter the new user's name by highlighting and selecting a group, and then
selecting OK.
Assign the User to a Group.
Assign a password to the User. You can use camera buttons 1 to 9 on the front
panel or the virtual keyboard to assign the password. The password can be up to
8 digits.
Confirm the password.
Select OK and press
. A virtual keyboard appears where you
.