Figure 3-64 Video Loss Settings Screen - Honeywell HRSD8 User Manual

Configuration
Associating Spot Monitors with Cameras
A Spot monitor can be associated with a camera. The DVR displays the associated
camera on the Spot monitor whenever it detects motion on the selected camera.
1.
2.
3.
Save your Motion Detection changes by highlighting Save and pressing
Cancel to exit the screen without saving the changes.
Video Loss Screen
You can use the Video Loss function to see if anything is obscuring the camera.
The DVR can be set to react to video loss differently for each camera. Each camera can:
•
•
•
•
•
•
Check Obscuration Settings
The DVR can be set to check
1.
Document 800-03650 Rev D
02/09
Highlight the desired field under the Spot Monitor heading, and press
of Spot monitors and cameras appears.
Select from the list of spot monitors and cameras.
Select OK and press
be associated with other cameras
trigger an Alarm-Out connector
sound the DVR internal buzzer
notify a number of different devices
move PTZ cameras to preset positions
and/or display a camera on a SPOT monitor
Highlight Video Loss in the Event menu and press
screen appears.
Figure 3-64 Video Loss Settings Screen
to load the settings.
to see if anything is obscuring the camera.
. A list
. Select
. The Video Loss setup
91