Configuring Call Waiting; Blocking Caller Id - Cisco 301 User Manual

Using the Web Interface

Configuring Call Waiting

Configuring Call Waiting

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5

Blocking Caller ID

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
Call waiting alerts you when you are on a call by ringing and displaying a status
message that you have another incoming call. If you turn call waiting off, incoming
calls do not ring your phone if you are on another call, and the caller hears a busy
signal or message.
To turn call waiting on or off:
Log in to the web interface.
In the Voice tab, click the User tab.
Under Supplementary Services, locate the CW Setting field.
Choose yes or no to enable or disable.
At the bottom of the page, click Submit All Changes.
You can block Caller ID from your phone so that your phone number will not
appear to the person you call.
To block Caller ID:
Log in to the web interface.
In the Voice tab, click the User tab.
Under Supplementary Services, locate the Block CID Setting field.
Choose yes or no to enable or disable.
At the bottom of the page, click Submit All Changes.
5
76