Placing A Three-Way Conference Call - Cisco 301 User Manual

Using Basic Phone Functions

Placing a Three-Way Conference Call

STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3

Placing a Three-Way Conference Call

STEP 1
STEP 2
STEP 3
NOTE
STEP 1
STEP 2
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
To unpark if you know the park line number:
Press the unpark softkey.
Enter the number of the park line (for example, the number that was entered in
Step 2 of "parking a call.")
Press dial. The call is picked up on your phone.
To view a list of parked calls (and unpark from the list):
Press the Setup button.
Scroll to Call Park Status and press the select softkey.
Choose the parked call you want to retrieve and press unpark.
Cisco SPA 301
To initiate a conference call:
During an active call, press the Flash button. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
Dial the second person's telephone number.
Press the Flash button again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected.
Cisco SPA 303
To initiate a conference call:
Press the conf softkey during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
Dial the second person's telephone number.
3
51