Switching Between Multiple Calls On Hold On A Single Line (Cisco Spa 303); Ending A Call - Cisco 301 User Manual

Using Basic Phone Functions

Ending a Call

Ending a Call

Cisco Small Business IP Phone SPA 30X User Guide (SIP)
To resume a call:
Cisco SPA 301—Press the Flash button.
Cisco SPA 303—Press the flashing red line button for the call or the Hold button or
the Resume sofkey. If you have multiple calls, all calls are put on hold except the
active call.
If you are on a call and another call comes in:
Cisco SPA 301—Press the Flash button. To resume the first call, press the Flash
button again.
Cisco SPA 303—Do one of the following:
• Press the Answer or Ignore softkey.
• Press the Hold button/Hold softkey to place the call on hold and press the
flashing red line button to answer the incoming call.
To resume the first call, press the flashing red line button or the Hold button or the
Resume softkey.
Switching Between Multiple Calls on Hold on a Single Line
(Cisco SPA 303)
You can have up to two calls on each phone line. If one or more calls on a line is on
hold, the black bar at the top of the screen shows the call that is on hold (indicated
by the right arrow). The call information at the bottom of the screen shows the
active call.
To switch between two calls on a single line, press the flashing line button. If
multiple calls are on hold on multiple lines, use the navigation button to scroll up or
down and press the flashing line button for the call you have selected.
To end a call:
• If you are using the handset, hang up.
• If you are using the speakerphone, press the Speaker button (Cisco SPA 303).
• If you are using the headset, either press the Headset button (wired) or replace
the receiver (when using certain wireless models) - Cisco SPA 303.
3
40