Using Basic Phone Functions
Turning Call Waiting On and Off
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Turning Call Waiting On and Off
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
Press the save softkey.
Using the star code:
Enter *78 to activate Do Not Disturb.
Deactivating Do Not Disturb
Using the -dnd softkey:
To deactivate Do Not Disturb, press the -dnd softkey.
Using the Setup button:
You can also deactivate Do Not Disturb by doing the following:
Press the Setup button.
Scroll to Preferences and press the select softkey.
Scroll to Do Not Disturb and press the edit softkey.
Press the y/n softkey to change to yes.
Press the ok softkey.
Press the save softkey.
Using the star code:
Enter *79 to deactivate Do Not Disturb.
Call waiting alerts you when you are on a call by ringing your phone and displaying
a status message that another call is ringing. If you turn call waiting off, incoming
calls do not ring your phone if you are on another call, and the caller hears a busy
signal or message.
You can also turn call waiting on and off from your PC using the IP Phone Web
Interface. See the
"Configuring Call Waiting" section on page
3
76.
48