Configuring Call Waiting; Blocking Caller Id - Cisco SPA 303g User Manual

Configuring Call Waiting

Call waiting alerts you when you are on a call by ringing and displaying a status message that
you have another incoming call. If you turn call waiting off, incoming calls do not ring your phone
if you are on another call, and the caller hears a busy signal or message.
To turn call waiting on or off:
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.
STEP 3 Under Supplementary Services, locate the CW Setting field.
STEP 4 Choose yes or no to enable or disable.
STEP 5 At the bottom of the page, click Submit All Changes.

Blocking Caller ID

You can block Caller ID from your phone so that your phone number will not appear to the
person you call.
To block Caller ID:
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.
STEP 3 Under Supplementary Services, locate the Block CID Setting field.
STEP 4 Choose yes or no to enable or disable.
STEP 5 At the bottom of the page, click Submit All Changes.
74