Changing The Lcd Contrast (Cisco Spa 303); Configuring The Phone Screen Saver (Cisco Spa 303) - Cisco 301 User Manual

Using the Web Interface

Changing the LCD Contrast (Cisco SPA 303)

STEP 3
Changing the LCD Contrast (Cisco SPA 303)
STEP 1
STEP 2
STEP 3
STEP 4

Configuring the Phone Screen Saver (Cisco SPA 303)

STEP 1
STEP 2
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
• Deep Bass—Enable to enhance low frequency audio.
Click Submit All Changes.
Log in to the web interface.
In the Voice tab, click the User tab.
Under LCD, you can adjust the LCD contrast by entering a number between 1 and
10, with 1 being low contrast.
Click Submit All Changes.
To configure the phone screen saver:
Log in to the web interface.
In the Voice tab, click the Phone tab.
Under General, you can configure the following:
• Screen Saver Enable: Turns the screen saver on and off.
• Screen Saver Wait: The number of minutes that the phone is idle before the
screen saver starts.
• Screen Saver Icon: The display type:
- A background picture.
- The station time in the middle of the screen.
- A moving padlock icon. When the phone is locked, the status line
displays a scrolling message "Press any key to unlock your phone."
5
80