Placing A Three-Way Conference Call - Cisco SPA 504g User Manual

Placing a Three-Way Conference Call

You can start conference calls by:
calling both numbers and pressing the conf softkey.
•
conferencing an active and held call using the confLX softkey
•
Three-way Conference Calling:
To initiate a conference call:
STEP 1 Press the conf softkey during an active call. The first call is placed on hold, a second line is
opened, and you hear a dial tone.
STEP 2 Dial the second telephone number.
STEP 3 Press the conf softkey again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected.
Conferencing a Held Call with an Active Call
If you have a call on hold and an active call, you can create a conference call that includes the active
call and the call on hold
With an active call and one or more calls on hold, press the conf softkey.
If you have only one call on hold, the conference call is created between the three of you.
•
If you have more than one call on hold, choose the held call you want to conference in by
•
pressing the line button of the call on hold.
40