Domain Filtering; Intrusion Detection - Digicom Wireless 3G Gateway User Manual

3G Gateway Series
• Specify the IP Validator Rule by specifying the IP Address type (Single, Subnet), IP Address, Netmask, and Status (Enabled/
Disabled).
• Click Apply.

5.6.2. Domain Filtering

To specify domain filter settings:
• Specify the rule action as Allow or Deny and click Apply.
• Enter the filter details such as Filter Name, Policy Name, Domain Filter, Start Time (hh:mm:ss), End Time (hh:mm:ss).
• Click Add.

5.6.3. Intrusion detection

Configuration
5.35