3G Gateway Series
2.1. BATTERY BACKUP
The battery backup is placed into the product. The connection of the battery is at the installer or at the end user's care.
Battery backup features: Li-ion 7,4V 1700mAh
To connect the battery backup:
• Power off the device and remove the plastic cover by turning the screws
• Insert the connector into the card as shown in picture
• Close the upper plastic cover and secure it by using the two screws.
2.1.1. Replacement of battery
The battery is sticked on the device.
To replace it, disconnect the connector from the card and gently remove the battery.
Note: You are advised to use battery supplied by Digicom only.
Hardware Installation
2.3