Table of Contents
Advertisement
3G Gateway Series
Radius Server
Radius server configuration is required when user configures the wireless network for Radius Authentication (802.1x EAP) for
WPA/WPA2 security.
It allows user to configure different accounting and authentication servers or to configure the same server for both authentication
and accounting. It allows you to configure (Name, IP Address, UDP Port, Retries, Timeout) settings for the Radius server.
Click Add to add the Authentication Server:
To enable/disable the radius server: Select Enable or Disable and click Apply.
To set the authentication server:
• Click Add.
• Enter the Name, IP Address, Shared Key, UDP Port, Retries (connection retry time), Timeout, and VAP Port details.
• Click Submit.
To set the accounting server:
Enter the details as described above and click Submit.
5.6
Configuration
Advertisement
Table of Contents
