Umts; Fxs Routing Table - Digicom Wireless 3G Gateway User Manual

3G Gateway Series
Call progress detection
Tone: 3G gateway checks the Tone parameters (Ringback, Busy and Congestion) in order to define the call status.
Line reversal:
Ringing Frequency:
3G Gateway checks the set ring frequency define the presence of an incoming call.
Tone
It checks the Frequency and Tone Cadence range to define the call status.

5.3.4. UMTS

C
Volume Rx and Tx
Set the volume on UMTS interface, from 0 (silence) to 7(high).

5.3.5. FXS Routing table

With FXS routing table you can decide to forward the numbers dialed on FXS (phone or PBX trunk) to the GSM or to the FXO.
Default is "route to GSM".
C
Press Add to insert a new rule.
C
5.22
3G Gateway checks the polarity reversal in order to define the call status.
Configuration