Table of Contents
Advertisement
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
4.
Select A remote VPN client (single PC) radio button and click Next.
The Summary screen displays:
Note:
To view the VPNC-recommended authentication and encryption
settings used by the VPN Wizard, click the here link.
5.
Click Done.
The VPN Policies screen displays, showing that the new tunnel is enabled:
6.
(Optional) To view or modify a tunnel's settings, select its radio button and click Edit.
7.
Use VPN client software on the computer to configure it as a VPN client.
Add a Gateway-to-Gateway VPN Tunnel
This section describes how to use the VPN Wizard to set up the VPN tunnel between two
gateways. The LAN IP address ranges of each VPN endpoint have to be different. The
connection will fail if both are using the default address range of 192.168.0.x.
To add a gateway-to-gateway VPN tunnel:
1.
Log in to Gateway A on LAN A.
Virtual Private Networking
125
Advertisement
Table of Contents
