Table of Contents
Advertisement
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Note:
WAN1 is for normal Internet access and WAN2 is for IPTV service. If
you are subscribed to IPTV, you need to set up WAN2. The set up
for WAN1 and WAN2 should be the same. If you are not subscribed
to IPTV service, you do not need to set up WAN2. VLAN tags are
used to distinguish the WAN1 and WAN2 traffic.
3.
Select one of the following radio buttons, and fill in the fields:
•
Yes. Select the encapsulation method and your internet service provider.
•
No. Enter the account and domain names, only if needed.
4.
Enter the settings for the IP address and DNS server.
The default settings usually work fine. If you have problems with your connection, check
the ISP settings.
5.
Click Apply to save your settings.
6.
Click Test to test your Internet connection.
If the NETGEAR website does not display within 1 minute, see
Troubleshooting.
Internet Setup Screen Fields
The following descriptions explain all of the possible fields in the Internet Setup screen. The
fields that display in this screen depend on whether tan ISP login is required.
Does Your Internet connection require a login? Answer either yes or no.
If your ISP requires a login and you selected yes, the following screen displays:
These fields display when your ISP requires a login:
NETGEAR genie Basic Settings
27
Chapter 10,
Scroll to
view more
settings
Advertisement
Table of Contents
