Set Up A Client-To-Gateway Vpn - NETGEAR N600 DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
A VPN tunnel between gateways is a good way to connect branch or home offices and
business partners over the Internet. VPN tunnels also enable access to network resources
across the Internet. In this case, use gateways on each end of the tunnel to form the VPN
tunnel endpoints. For more information about how to set up this configuration, see
Gateway-to-Gateway VPN Tunnel

Set Up a Client-to-Gateway VPN

This section describes using the VPN Wizard to set up the VPN tunnel. If you want to
manually specify the settings, see
To configure a client-to-gateway VPN tunnel:

1. Select ADVANCED > Advanced - VPN > VPN Wizard.
2. Click Next.
The following screen displays:
3. Fill in the Connection Name and pre-shared key fields.
The connection name is for convenience and does not affect how the VPN tunnel
functions.
on page 125.
Auto Policy Example
Virtual Private Networking
124
on page 131.
Add a