NETGEAR N600 DGND3800B User Manual page 29

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
- Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your
ISP automatically assigns this address.
- Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it also.
• NAT (Network Address Translation). NAT allows computers on your home network to
share the modem router Internet connection. NAT is enabled by default because it is
needed in most situations. The following settings are available:
- Enable
- Disable
- Disable Firewall
If your ISP does not require a login and you selected no, the following screen displays:
These fields display when no login is required:
• Account Name (If required). Enter the account name provided by your ISP. This might
also be called the host name.
• Domain Name (If required). Enter the domain name provided by your ISP.
• Internet IP Address.
- Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP
automatically assigns these addresses.
- Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP's modem router to which
your modem router will connect.
- Use IP Over ATM (IPoA). Your ISP uses classical IP addresses (RFC 1577). Enter
the IP address, IP subnet mask, and gateway IP addresses that your ISP assigned.
• Domain Name Server (DNS) Address. The DNS server is used to look up site
addresses based on their names.
NETGEAR genie Basic Settings
29
Scroll to
view more
settings