Erase The Current Configuration Settings; Change The Password - NETGEAR N600 DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

Erase the Current Configuration Settings

You can use the Erase button erase the configuration and restore the factory default settings.
You might want to do this if you move the modem router to a different network or if you
changed the password and have forgotten what it is. (The default passwords are on the
product label).
You can also use the Restore Factory Settings button on the bottom of the modem router to
erase the configuration and restore the factory settings. (See
To erase the configuration settings:

Click the Erase button.
The factory default settings are restored. The user name is admin, the password to
password, and the LAN IP address is 192.168.0.1. DHCP is enabled.

Change the Password

This feature let you change the default password that is used to log in to the modem router
with the user name admin. This is not the same as changing the password for wireless
access. The label on the bottom of your modem router shows your unique wireless network
name (SSID) and password for wireless access (see
To set the password for the user name admin:

1. Select ADVANCED > Administration > Set Password.
2. On the Set Password screen, type the old password, and type the new password twice.
3. Change the login time-out to a value between 1 and 99 minutes if the default value of 5
minutes does not meet your needs.
4. Click Apply.
Your changes take effect.
Label on page 13).
Administration
93
Factory Settings on page 149),.