Wireless Devices And Security Settings; Types Of Logins And Access; Netgear Genie Setup - NETGEAR N600 DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
- ISP Domain Name Server (DNS) addresses
- Fixed or static IP address
- Host and domain names
- Depending on how your ISP set up your Internet account, you could need to know
one or more of there settings for a manual setup:
• Virtual path identifier (VPI) and virtual channel identifier (VCI) parameters
• Multiplexing method
• Host and domain names

Wireless Devices and Security Settings

Make sure that the wireless device or computer that you are using supports WPA or WPA2
wireless security, which is the wireless security supported by the modem router.

Types of Logins and Access

There are separate types of logins that have different purposes. It is important that you
understand the difference so that you know which login to use when.
• Modem router login logs you in to the modem router interface. For more information
about this login, see
• ISP login logs you in to your Internet service. Your service provider has provided you with
this login information in a letter or some other way. If you cannot find this login
information, contact your service provider.
• Wireless network key or password. Your modem router is preset with a unique wireless
network name (SSID) and password for wireless access. This information is on the label
on the bottom of your modem router.

NETGEAR genie Setup

NETGEAR genie runs on any device with a web browser. Installation and basic setup takes
about 15 minutes to complete.
To use NETGEAR genie to set up your modem router:

1. Turn on the modem router by pressing the On/Off button.
2. Make sure that your computer or wireless device is connected to the modem router with an
Ethernet cable (wired) or wirelessly with the preset security settings listed on the bottom
label.
3. Launch your Internet browser.
Use NETGEAR genie after Installation
Access the Modem Router
19
on page 21.