Setting Up The Client-To-Gateway Vpn Configuration (Telecommuter Example; Step 1: Configuring The Client-To-Gateway Vpn Tunnel On The Vpn Router At The Employer's Main Office - NETGEAR DG834Gv1 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual

Reference Manual for the Model Wireless ADSL Firewall Router DG834G
192.168.0.1/24
Telecommuter Example
LAN IP
192.168.0.1
Router
(at employer's
main office)
Figure F-12: Addressing and subnet used for telecommuter example
Setting Up the Client-to-Gateway VPN Configuration
(Telecommuter Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN Client and a
network gateway involves the following two steps:
• Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer's
Main Office.
• Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC at the
Telecommuter's Home Office
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the
VPN Router at the Employer's Main Office
Follow this procedure to configure a client-to-gateway VPN tunnel by filling out the VPN Auto
Policy screen.
Log in to the VPN router at its LAN address of
1.
admin and password of
the VPN Policies screen. Click Add Auto Policy to proceed and enter the information.
F-14
Gateway A
WAN IP
FQDN
ntgr.dyndns.org
"fromDG834G.com"
configures the NETGEAR ProSafe VPN Client endpoint.
password . Click the VPN Policies link in the main menu to display
202-10006-05, June 2005
NAT Router B
WAN IP
0.0.0.0
"toDG834G.com"
Router
(at telecommuter's
home office)
http://192.168.0.1 with its default user name of
NETGEAR VPN Configuration
Client B
192.168.2.3
PC
(running NETGEAR
ProSafe VPN Client)