N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
If you are using the modem router as the base station with a non-NETGEAR router as the
repeater, you might need to change more configuration settings. In particular, you should
disable the DHCP server function on the access point that is the repeater.
To configure the modem router as a repeater:
1.
Log in to the modem router that will be the repeater.
2.
Select BASIC > Wireless and verify that the wireless settings match the base unit exactly.
The wireless security option has to be set to WEP or None.
3.
Select ADVANCED > Advanced Setup > Wireless Repeating.
4.
Select the Enable Wireless Repeating Function check box.
5.
Select the Wireless Repeater radio button.
6.
Fill in the Repeater IP Address field.
This IP address has to be in the same subnet as the base station, but different from the
LAN IP address of the base station.
7.
(Optional) Select the Disable
8.
In the Base Station MAC Address field, enter the MAC address for your modem router.
9.
Click Apply.
Advanced Settings
101