NETGEAR N450 WNR2500 Installation Manual

Installation Guide
N450 Wireless Router WNR2500
Package Contents
N450 Wireless Router
Power adapter Ethernet cable
Step 1.
Unplug the power
to turn off your modem.
DSL
or cable
Internet
Modem
Step 4.
Connect the power adapter to the
router, then plug it into an outlet.
Wait until the Wireless LED turns
solid green.
Step 2.
Connect one end of the blue
Ethernet cable to your modem,
and the other end to the Internet
port on your router.
N450 Wireless Router
Step 5.
Connect the router
to your computer.
Use another Ethernet cable to establish
a wired connection as shown in this diagram.
(Optional) Connect wirelessly by using the
preset wireless security settings located
on the product label.
Step 3.
Plug in, then turn on your modem.
Wait approximately two minutes
until your modem turns on.
If your modem has a battery backup,
first remove and reinsert the battery
before connecting your modem to power.
(Not included)
Step 6.
Open a browser.
If the web page does not display,
close and reopen the browser and
enter http://www.routerlogin.net
in the address bar, or see the
"Troubleshooting" chapter of the
user manual.