Reminders - Honeywell LYNX Touch Security System User Manual

Scenes
Scenes are used to control a single or group of devices together, turning them OFF, ON, ON
to a preset lighting level, temperature or mode, or lock/unlocked. The LYNX Touch has 20
Scenes which may each be configured with up to 10 devices each. Scenes can be manually
activated or activated by a Rule. Rules are used to control Scenes by pre-set "Conditions"
and "Triggers". Up to 20 Rules may be programmed locally into the LYNX Touch.
Programming a Scene
Ready To Arm
Arm Away Arm Stay
Delay 10:18 AM June 8, 2010
Ready To Arm
Switches
68
Thermostat
Locks
Tools
Ready To Arm
Add New
Edit
Scene
72
Zones Automation
Message Phone
More
5100-100-004-V0
Rules
Schedules
Scenes
5100-100-007-V0
3. Select "Add New Scene". The system
4. If desired, select clear then enter a name
Delete
5100-100-021-V0
– 55 –
USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
1. With the system in the disarmed state,
select the "Automation" icon from the Home
Screen. The system displays the Keypad
screen.
2. Select the "Scenes" icon. The system
displays the Scenes screen.
displays a keypad along with the next
available Scene number.
(up to 13 digits long) for the scene on the
displayed keypad then select "Done".
.
Automation