Honeywell LYNX Touch Security System User Manual page 49

Ready To Arm
Name
Type
Trigger Output
Start Zone Type Stop Zone Type
Not Used Not Used
Start System Operation Stop System Operation
Not Used Not Used
OR
Ready To Arm
Name
Type
Scene
Zone Type Fault Zone Type Restore
Not Used Not Used
System Operation 1 System Operation 2
Not Used Not Used
7. Select "Action". Dependant upon the Type
01
Action
None
Save
8. Select "Start Zone Type" or "Zone Type Fault"
5000-100-189-V0
Scene
Action
None
Save
5100-100-071-V0
– 49 –
USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
selected previously, the system scrolls between
several options:
None
Permanent On
On for 2 sec
Pulsing
Send
Run Scene
(if "Scene" was selected in Type field). The
system displays
(dependant upon the Type that was selected):
Not Used
Entry Exit 2
Interior Follower
24 Hour Silent
Use the " " " " buttons to scroll to second
page of zone type options.
Silent Burglary
Interior With Delay
Carbon Monoxide
No Response
Use the " " " " buttons to scroll to third page
of zone type options.
Arm Away
Monitor
Resident Response
General Response
Automation
the following options
Entry Exit 1
Perimeter
Day / Night
24 Hour Audible
24 Hour Auxiliary
Fire No Verification
Trouble
Arm Stay
Disarm
Resident Monitor
General Monitor